Drying time:
At ambient temperature 23°C and relative humidity 65%:
to the touch after approx. 6 hours, cured after 4 days.

Application
- FLAMMOTECT-A is intended for protecting electrical cables in inside
and outside areas, in the rooms exposed to moisture and atmospheric influences (immersing the coating in sea water for a few weeks did not change its characteristics).

NOTE:
- mix thoroughly (stirring the emulsion for 5 minutes minimum using drill and paddle - recommended) before the application; emulsions can be dispersed adding to 3% water
- spread with a brush, paint roller, or spray paint. It is suggested to spray paint with an Airless gun, for which strongly advised are: FLAMMOTECT-A - working pressure 210 bar, nozzle: 0.79-1.0mm, no filter